Libelium Waspmote - Plug & Sense! loggers can be configured to send data to eagle.io in a few easy steps.
Waspmotes can communicate directly or use a Meshlium to connect large sensor networks.
- Create a Data Source and select Data logger as the Source Type. Choose Libelium from the list and click Next.
- Select Waspmote / Plug & Sense! as the Model. Click Next.
- Select TCP Server as the transport type if the Waspmote will connect directly to eagle.io (alternatively jump to Step 4 for Meshlium connection). A Waspmote Id will be automatically generated. Select the timezone of the logger’s clock and click Next.
- Select Meshlium if the Waspmote will send data via a Meshlium (alternatively jump to Step 6). Enter the Meshlium Id and optional Auth key if configured in the eagle.io application on the device. Click Verify.
The eagle.io application in the Meshlium device needs to be started and initial connection established with eagle.io before it can be used as a transport.
- Select the Waspmote you would like to acquire data from and click Next.
- Parameters will be automatically created on initial data acquisition. Click Finish to complete the setup.
You can disable/enable parameters from the Data Source properties dialog after initial creation.
Use the settings below for Direct Connection or Meshlium Connection with your Waspmote.
Refer to our example Waspmote operating programs for use with 3G
(download) and 4G modems
(download) to establish a direct connection to eagle.io.
Apply the following settings to the variables at the top of the operating program:
- Use the unique Waspmote Id generated during Data Source creation. eg. “8494091048”
Connect to the web interface on the Meshlium device, open the eagle.io Cloud Connector configuration and Save the following settings prior to clicking Start to run the application:
- Meshlium Name
- Enter a name to help identify this device
- Auth Key
- Optional secret key required to create a Data Source that uses this device in eagle.io (or leave blank for none).
Use the Events view with the detail level set to Debug for reviewing communication history and diagnosing configuration issues.